WundaSmart FAQs

Here are some of our customers' most Frequently Asked Questions. If your answer isn't here, visit our contact page

Yes! If the internet goes down your heating will carry on working within the premises. It will follow the planned schedule through the internal RF signal, but you cannot alter or adjust it using the app. However, you can still use the individual manual controls on each device.

You can have up to 5 users on one account

Your user data is safe within your Smart Hub! If you value your privacy and want to be able to choose to keep your Data private, WundaSmart does exactly that. Your App usage and activity is safely stored and locked within your Smart Hub, (Secure and Snoop free).

Zoning happens to be the cheapest and most convenient way to improve energy ratings.

The best place to position your WundaSmart HubSwitch is next to the boiler, because of the boiler backplate.

2 ways
1: you can use WPS, on HubSwitch you turn it on by holding setup until the pink LED starts flashing, then we also run WPS on the router and the devices will connect.
2: Normal pairing process can be done, settings are not lost.

Log in to the router and switch Smart Setup OFF. Save the settings and reboot the router (Switch on and off) then try again.

Go into the room > Settings > Advanced Parameters > Connection box configuration > Make sure relay is selected

This is shown on the below vid from 3:00 to 3:20

Our Slim Thermostat’s are shipped with an LED to support features we hope to implement via software in the future.

If you have a question that has not been answered here, please don’t hesitate to contact us using the  live chat or contact form on the contact us page.


Contact Us