Water Underfloor Heating

Electric has much higher running costs in comparison to water based systems making it suitable for smaller areas such as en suites but not for larger living areas and whole homes. For open plan kitchen and family areas, water based systems are more economic costing up to 65% less to run than electric. 

Learn more about the pros and cons of UFH

An underfloor heating system can be an ideal and cost-effective way of keeping your home warm. It can be easily installed yet does require a fair amount of preparation and time.

Even before installing an underfloor heating system, there are other ways to reduce heat loss in your home which can prove easy and budget-friendly.

Find out more about how to install underfloor heating. 

Many people have the perception that underfloor heating is incredibly difficult to install. Involving huge pipes with lots of digging, often leading to them thinking it will be a costly and stressful process. However, with a Wunda Rapid Response® system, this could not be further from the truth.

There’s no digging up floors and installation is easy and relatively hassle free. 75m2 could be laid over a weekend by competent DIYers ready for your professionals to hook up to your heat source.

Find out more about underfloor heating cost.

Warm water is pumped from the heat source to the manifold. If the floor heating requires warm water, the thermostatic valve will open allowing heated water into the manifold. From the manifold, heated water is pumped around the floor heating pipes, returning to the manifold and then either released back to the boiler/heat source via the boiler return valve for re-heating or blended back into the floor loop via a one-way valve. When all rooms reach desired temperatures, the room thermostats will signal to the actuators and pump to shut down, this in turn stops heated water circulating through the floor.

Find out more on how underfloor heating works.

Retrofitting underfloor heating can be a relatively easy process without the need to dig up the floors throughout your house. Wunda’s easy to install system comes with so many benefits, it warms up just as quickly as radiators and runs at a lower flow temperature which uses much less energy.

UFH circulates warm water through the plastic pipes to effectively heat up the floor first and allow for a warm living area with a cool ceiling. The water’s temperature can be between 35 and 55°C which is regulated by a mixing valve at the manifold.

Find the Ideal Temperature for Underfloor Heating in your home

Tile and natural stone floors work perfectly with underfloor heating as they are natural conductors. One thing to remember with these floor finishes is the thicker they are, the longer your response time will be and the longer the floor finish itself will hold the heat and take to cool down.

Learn more about UFH and floor coverings.

Underfloor heating systems will cost users around 25% less than radiators to run on average and 60% less than electric floor heating systems. When installing a Wunda Rapid Response® system which uses smart controls and zoning the savings can be up to 50%.

Learn more about underfloor heating efficiency

Wunda’s easy to install system comes with so many benefits, it warms up just as quickly as radiators and runs at a lower flow temperature which uses much less energy. You’ll be able to heat each room separately, and your home will be far more comfortable with heat rising from the floor and heating the whole room.